1. The demand for urban landscape lighting control

At present, urban landscape lighting and landscape lighting are mostly controlled by traditional time switch. In this way, the time of switch lights will be solidified after acceptance of all landscape works. It needs manual adjustment, labor cost and operation cumbersome. During holidays, major festivals and other periods, no fast and flexible night view lights can be adjusted and controlled, which makes it impossible for remote control and operation fault detection, resulting in a great discount on management and intensity of landscape lighting management.
Hung Bogor city landscape lighting network remote control system can achieve energy-efficient lighting, city landscape lighting and architectural landscape lighting stepless wisdom lighting function light, remote monitoring, remote intelligent control can greatly reduce the landscape, landscape lighting energy consumption, and effectively raise the management efficiency of landscape lighting.

Hung Bogor networking urban landscape remote lighting control system is set up single lamp energy saving (electricity saving rate up to 45-50%), monitoring (single lamp to four remote), anti-theft, intelligent control management in one, greatly improving the management level and efficiency of urban street lamps, and maximize energy saving goals. Realization：
1) points at light control: support the realization of creative lighting effect, according to the automatic precise dimming time, any light effect can be achieved.
2) dimming control: single point, double point and multi point area, the group is dimming, solve excessive lighting, effective means to achieve energy-saving.
3) lighting settings: Lamp name, number, working current and voltage settings.
4) set the scene: preset a variety of lighting effects, a key call.
5) illuminance sensor control: a technical scheme to ensure that the illumination is consistent.
6) the human body sensor control: energy saving public area of humanity, people to light, people take the lights off.
7) remote centralized automatic control, realize automatic lighting, avoid the waste of electric energy to control the appearance of the artificial.
8) manual control: the local manual control scheme for some areas requiring manual intervention can be used with panels or touch screens.
9) intelligent node control: automatic switch control for the electric equipment, such as air conditioning, electric curtain, exhaust fan and so on.
10): the current energy management scheme by the statistics of the total power consumption of.
11) the system is extensible, it can be operated by single machine and network, and it can also be perfectly connected with other intelligent systems.

Two, Hong Bogor network intelligent lighting system scheme architecture

Three. The management scheme of landscape remote lighting control system

1, remote intelligent monitoring: using computer, cell phone, tablet and other intelligent terminals to monitor the landscape lights, garden street lamps, square lights and the working state of the controller.
2, a variety of control modes: timing control, latitude and longitude control, illumination control, time sharing, holiday control and other control modes to achieve street lighting system on-demand lighting.
3, time plan control: support date time plan, latitude and longitude time plan and weekly time plan three kinds of time plan, each time plan has custom scene mode. The user can presuppose the switch light time, and can also execute the switch light according to the local sunrise and sunset time.
4, partition group control: the controller equipment can be grouped according to the section or area, and the different sections or regions can be controlled independently.
5, electronic map management: adding, deleting, modifying, parameter setting and switching light operation on the terminal equipment on the electronic geographic map.
6, fault alarm: including daylight light, night lights out, equipment power off, contactor fault and other abnormal alarm. When the fault occurs, it sends the alarm information to the park manager.
7, advanced storage function: the advanced storage function of landscape lighting controller, including built-in program, clock, timetable, scene mode, history record and alarm.
8, remote meter reading and device expansion function: the landscape lighting controller in the program provides standard RS485 communication expansion interface, supporting protocol meter reading and other communication modules.
9, hierarchical user management rights: park landscape lighting control system provides an independent user management interface for different users and distinguishes management rights.

Four. Design basis

★ This "general civil design" GB503522005
★ "civil building electrical design standard" JGJ/T 16-2008
★ This "standard" intelligent building design GB/T50314-2006
★ "intelligent building assessment standard" DG/T08-2001
★ This "standard" intelligent construction engineering quality inspection GB50339-2003
★ "intelligent building construction and acceptance of rules" (DG/TJ08-601-2009 J10111-2010)
★ By the national building standard design of electrical device standard atlas, construction of electrical installation engineering.

Five, product selection

Company profile
Bogor Networking Technology Co., Ltd. is committed to the research, development and design of the lighting control system. It is widely used
At present, more than 200 intelligent lighting projects have been completed in public buildings, stadiums, exhibition centers, shopping malls, villas, mansions, high-end hotels, office buildings and large supermarkets. The stability of the system, significant energy saving characteristics, in the practical application of the owners of the consensus.
As far as lighting control system is concerned, Bogor Hong Kong Network considers not only the combination of lighting and lighting scenes, but also the economy, reliability and practicability of the system, and the energy saving characteristics of the system after operation, as well as the intelligence level of the whole building.
An overview of the principle of intelligent lighting system for Bogor network
The HM-IoT lighting control system is a two wire intelligent control system, which is mainly used for the control of the lighting system.
In addition, it can also interact with other systems such as background music, fire protection, security and other systems.
All units of the unit (except power) are embedded with microprocessors and storage units, which are connected to a network by a pair of signal lines (UTP5).
Each unit sets the unique unit address and sets its function with the software, and controls the load of each circuit through the output unit. The input unit establishes a correspondence through the group address and the output component. When input is present, the input unit transforms it into digital signal and broadcasts on the system bus, and all output units receive and make judgement to control the output of the corresponding circuit.
The HM-IoT lighting control system is connected to the network through two buses. The bus not only provides a 12 volt DC power supply for each component, but also loads the control signal. The logic correspondence between the control switch and the output circuit is established by system programming.
HM-IoT lighting control system components are modular structure, and have systematic products, system expansion is convenient. At the same time, through special interface and software components, can directly access the computer real-time monitoring, or access to Ethernet for remote real-time monitoring. Therefore, it is more simple and flexible in design.
The HM-IoT lighting control system is distributed control, modular structure and high reliability. Any control modules are built in
CPU, each input module (scene switch, multi key switch, infrared sensor) can be directly with the output module (dimmer, relay output) communication (to send instructions to accept instructions to execute instructions), avoid the centralized structure of the central CPU failure caused by paralysis of the whole system.
Integrated with BA system, HM-IoT lighting control system is an open system. It can be easily connected to other systems through special interface software, such as building automation system, access control system, security monitoring system, fire fighting system and so on.

Six. A brief introduction to the product

6, HM-IoT intelligent lighting system is composed of system equipment, lighting controller, field device (such as programmable switch, various inductors).
6.01, system equipment: installed in the central monitoring center, monitoring all the lighting circuits of the whole system, it can effectively analyze and manage all the devices of the entire lighting control system.

6.1, combined lighting

It provides a constant, low ripple DC12V power supply for the system module.

Functional characteristics:

Name / model: 42W12V system power HM-1235

1. International wide voltage standard, 110 to 220V voltage can be input.

Two. Redundant power supply function,

Three, 12VDC/3.5A output state detection,

Four. Over temperature automatic regulation and protection function,

Five, overload, over current, short circuit protection function,

Six. The indicator of the power output indicator,

Seven, the 2.54 line 485 bus communication terminal plug connection, extended mode. Stable and reliable connection, eliminating weak wire trouble

Eight, installation way: Standard 35mm guide type installation

Nine, operating temperature / humidity: -10~70 C /20%~92%RH,

Ten. Storage temperature / humidity: -0~50 C /20%-92%RH,

Eleven, high strength elastic hot Shuo and strong flame-retardant shell

Twelve, 4 modulus widths (one modulus =18MM)

Thirteen. The appearance size (long * width * high) 90.0*72.0*65.0 (MM)

6.2 system gateway (two selected one)

Functional characteristics:

1. name / model: Ethernet gateway controller -HM-10/100TCP/IP

First, up 10M Ethernet Serial 485 device to TCP/IP network and TCP/IP two, network to serial port 485 device data transparent transmission.

Three, an infrared probe, (parallel port) input interface, the realization of human infrared induction control bus output.

Four, 4 sets of scene programming output interfaces.

Five, a fire control 24V input signal control, with the fire automatic alarm system, fire signal power when the arrival of automatic opening system in advance set circuit.

Six. It has 5 operating modes, such as TCP Server, TCPClient, UDP, virtual serial port, point to point connection and so on.

Seven. It has the function of programming and debugging and management.

Eight, high strength elastic hot Shuo and strong flame-retardant shell

Nine, installation way: Standard 35mm guide type installation

Ten, specification: (long * width * high) 90.0*72.0*65.0 (MM)

Eleven, 4 modulus widths (one modulus =18MM)

1. name / model: GPRS wireless modulation and demodulation controller -HM-115kbGPRS

Support GPRS wireless transparent data transmission; support for data communication and multi center; automatic timing function: support automatic network timing; off-line timing function: support offline automatic timing switch data send instructions (up to more than 10 kinds of network settings offline switch command; acquisition: acquisition of serial device data, such as serial instrument PLC, collector, etc.; remote management function: support remote parameter setting, program upgrade

U high strength elastic hot Shuo and strong flame-retardant shell

Installation way: Standard 35mm guide type installation

Specifications: (long * width * high) 90.0*72.0*65.0 (MM)

4 modulus widths (a modulus of width =18MM)

6.3, light loop control

To meet the needs of the factory for lighting and rest control. The lighting loop of the factory can be connected to the intelligent lighting control system. Then, according to the rule of the light used in factories and commuters, the preset good lighting scenarios can be preset at different time periods, which can be programmed in a weekly period, and preset the corresponding lighting scenes at different times. The humanized realization of the working time lighting circuit management.

Functional characteristics:

Name / model: 4.8 16A intelligent controller HM-0416ZM

One, 4 relay switch output,

Two. The maximum 16A output of each circuit,

Three. Each circuit has a manual button switch.

Four. An independent programming scenario mode for each loop,

Five. Independent power memory function,

Six. It has remote programming and management functions.

Seven, the 2.54 line 485 bus communication terminal plug expansion.

Eight, loop switch load (resistance): 4 16A AC250V

Nine, relay life: more than 60000 times,

Ten, power supply voltage: DC12V (2.54 line input terminal plug,

Eleven. Control mode: RS485 bus and one to one control,

Twelve, installation way: Standard 35mm guide type installation

Thirteen, operating temperature / humidity: -10~70 C /20%~92%RH,

Fourteen. Storage temperature / humidity: -0~50 C /20%-92%RH,

Fifteen, high strength elastic hot Shuo and strong flame-retardant shell

Sixteen, 4 modulus widths (one modulus =18MM)

Seventeen. The appearance size (long * width * high) 90.0*72.0*65.0 (MM)

Eighteen. Support remote parameter setting and program upgrade

6.4. Control of dimming circuit

The intelligent lighting module can provide the most comfortable lighting with the most economical energy consumption. The system can ensure that the lights are lighted or the required luminance is achieved only when necessary, which greatly reduces the energy consumption of energy.

Functional characteristics:

Name / model: 6 road 0-10V dimming module Ai/SRD6.0-10.1

One, 6 channel DC0-10V (PWM)) dimming control output

Two. It is used to connect the LED0-10V dimming controller, and the smooth dimming of 0-10V can be realized according to the different requirements.

Three, dimming signal compatibility: 0-10VDC adjustable optoelectronic rectifier, the power supply to support 0-10VDC signal adjustment

Four, the maximum signal output current: <15mA

Five, with manual dimming button and light tuning +, - function

Six. The dimming curve can be set

Seven. The function of delay starting and closing

Eight, over temperature automatic regulation and protection function

Nine, independent scene pattern setting

Ten. It has remote programming and management functions

Eleven, 2.54 485, 17 3.50 bus terminal plug provided terminal

Twelve, a fire 24V input signal control, connected with the fire automatic alarm system, the automatic opening system in the automatic opening system when the fire signal power comes in.

Thirteen. The temperature of the working environment is 0 to 45, and the humidity is 0% ~ 95%.

Fourteen, installation way: Standard 35mm guide type installation

Fifteen, high strength elastic hot Shuo and strong flame-retardant shell

Sixteen, 9 modulus widths (one modulus =18MM)

Seventeen. The appearance size (long * width * high) 162.0*90.0*65.0 (MM)

6.5. The definition of light time pattern

According to the change of seasons, commuting time and illumination, the time is preset on the software interface and the lights are regularly controlled. The intelligent control module can invoke the corresponding scenes according to the user's preset time. If the lights are automatically opened at work, some lights are automatically dimmed or closed at work.

Functional characteristics:

Name / model: intelligent scene timing module Ai/CTL1.20.2

One, cycle by day, week, month and year,

Two, 2 relay control output, 1 20A output, 1 road 10A output,

Three. With a manual button switch,

Four, programmable timing implementation of scene and area control,

Five, Bluetooth wireless connectivity, mobile phone APP download time set, opening and closing time: XX hours: XX minutes,

Six. The setting of repeated time is set up in days, weeks, months and years.

Seven. The normal work and state memory of the internal clock after power off

Eight. Control mode: Standard RS485 communication

Nine. It has remote programming and management functions.

Ten, relay life: more than 60000 times,

Eleven, the power supply voltage: DC12V (5 input terminal plug)

Twelve, installation way: Standard 35mm guide type installation

Thirteen, operating temperature / humidity: -10~70 C /20%~92%RH,

Fourteen. Storage temperature / humidity: -0~50 C /20%-92%RH,

Fifteen, high strength elastic hot Shuo and strong flame-retardant shell

Sixteen, 6 modulus widths (one modulus =18MM)

Seventeen. The appearance size (long * width * high) 108.0*88.0*66.0MM

Eighteen. Support remote parameter setting and program upgrade

6.6, light automatic induction management

All lighting can be set according to the luminance sensor to automatically detect the ambient light and complete the automatic switching of opening / closing of the day / night. Make management and energy saving more scientific and orderly. For example, the stadium lighting can be judged by luminance sensor, and the ambient brightness is 1000 lumens, then some lights are automatically opened, and the illuminance of the stadium is compensated.

Functional characteristics:

Name / model: illuminance sensor As/SRDB0G.00.1

1. Programmable low power intelligent light illumination sensor.

Two, the device can be opened and closed by programming custom 0-3.4 million Lux light illumination control.

Three, the use of weak light also has a high sensitivity.

Four, it has the characteristics of wide measuring range, convenient operation, convenient installation and long transmission distance. It is suitable for all kinds of places, especially for agricultural greenhouses, urban lighting and other places. According to the different measuring places, the reliability is high, the linearity is good, and the anti-interference ability is strong.

Five. Standard RS485 bus communication,

Six. Working voltage: DC12V.

Seven, control mode: RS485 bus.

Eight, installation way: hanging wall installation and many other installation methods.

Nine. Single outer size: L110*109*56 (MM).

Eleven, operating temperature / humidity: -10~70 C /20%~92%RH.

Twelve, storage temperature / humidity: -0~50 C /20%-92%RH.

Thirteen. It has rain proof.

Functional characteristics:

Name / model: 3 40A electric energy detector HM-3040JC
One, can collect the AC three-phase (three way), voltage, current, active power, accumulative power consumption data value,
Two. The maximum 40A independent current monitoring can be connected to each road.
Three, real-time upload each circuit data value, automatic analysis of the circuit voltage, power and other data, real-time upload, can be remote,
Four. Set every circuit voltage, maximum power alarm value, minimum voltage and power alarm value by computer.
Five. It has remote programming and management functions.
Six. Standard RS485 bus communication extension.
Seven. Power supply voltage: AC220V
Eight, installation way: Standard 35mm guide type installation
Nine, operating temperature / humidity: -10~70 C /20%~92%RH,
Ten. Storage temperature / humidity: -0~50 C /20%-92%RH,
Eleven, high strength elastic hot Shuo and strong flame-retardant shell
Twelve, 6.5 modulus widths (one modulus =18MM)
Thirteen. The appearance size (long * width * high) 116*90.0*57.0 (MM)

Functional characteristics:

Name / model: temperature and humidity sensor HM-CR102
First, the product adopts the digital temperature and humidity sensor,
Two. The large LED mode shows the value of temperature and humidity.
Three. The alarm of the load line and the fault indication of the sensor,
Four, the standard RS485 communication function,
Five. It is suitable for unattended office so that it needs to be automatically heated and controlled.
Six, the user can set the upper and lower limits of temperature and humidity, circulation display mode, communication parameters and so on through key programming.
Seven, this series of products of strong anti-interference ability and strong ability of anti electromagnetic interference
Eight, the equipment ID can be inquired through the Internet and set up.
Nine, high strength elastic thermoplastic box, strong pit impact, strong flame retardancy;
Ten. Working voltage: DC12V
Eleven. Working current: less than 80MA
Twelve, protection mode: built-in temperature protection
Thirteen, installation way: Standard 86 bottom box installation
Fourteen. Single external size: 86.0*86.0*41.0 (MM

6.9, with the type of lighting control

The various lighting loops in the area can be connected to the control system. The 7 inch LCD multi-function touch panel can be placed at each entrance. The control interface can be turned to page, up to 5 pages, which is enough to achieve the demand of multi point control and centralized control in large area of the workshop.

Functional characteristics:

Name / model: seven inch intelligent industrial screen As/8048K070.1

A 7 "TFT color LCD screen, 1024*600 HD resolution, 16 million color.

Two. Industrial capacitance. ,

Three, the CPU:4 kernel 1.4G is based on the 32 bit RISC architecture, which uses the 28nm technology.

Four, RAM: run memory 512M DDR3.

Five, FLASH:EMMC 8G (supporting the SD card to extend the maximum 32G), six, the system version number: Android 4.4.2.

Seven, 2 standard RS485 communication port.

Eight, working voltage / current DC12V (DC5V) /580MA.

Nine, working temperature: -10~60 C.

Ten, working humidity: 10 ~ 90%RH.

Eleven, structure: aluminum alloy wire drawing face frame, metal shell.

Twelve, shape size: 206 x 142 (unit mm).

Thirteen, installation hole size: 195.6 x 131.6 (unit mm).

Fourteen, support JAVA, QT, C# programming and development applications.

Fifteen, WIFI: support WIFI Internet, 802.11b/g/n.

PWM dimming control: the luminaire (LED) is continuously dimmed in accordance with the demand.
Timing control: according to the sunrise and sunset automatic timing control switch lights, automatic tune light etc.;
Remote control: the switch and dimming control of the lamps and lanterns.
Data report: generate light rate, energy consumption report, use electricity analysis;
Remote upgrade: remotely upgrade the concentrator and controller.
Fault alarm: the alarm of lighting lamps and lanterns is automatically produced.
Line monitoring: according to the node automatic analysis of whether the cable is stolen timely alarm;
Data backup: the data can be imported and exported to ensure the integrity and security of the data