An overview of the system
"Energy saving, intelligent technology and aesthetics, the theme of the construction industry in twenty-first Century."
The energy consumption of lighting system in modern architecture has been up to 35%. The concept of "green" lighting has been introduced in the architecture field. The central idea is to use natural light source to the maximum, set the clock automatic control, and adopt new technologies such as illumination induction and dynamic and static sensors.
At the same time, modern electronic technology has brought a lot of fun to us and the way of life. How can the application of electronic technology be applied to our lives? Let's make our life more relaxed and colorful! Let our buildings change with the heart - the architecture is eternal, the music is flowing, the light is changeable! Let the light be combined freely!

Two. System functions and advantages
The functions and advantages of the application of intelligent lighting control system:
1, save electricity: using intelligent lighting control system, can use energy reasonably and effectively, reduce unnecessary consumption of electricity, and save up to 30%-40% energy consumption.
2, saving operation management costs: the system is easy to operate, only a small number of managers are needed to reduce the cost of operation management.
3, reduce the cost of installation and wiring: the traditional wiring is to connect the switch from the distribution to the load. Intelligent lighting system is composed of modules connected with the load, and the control panel and the module is connected with the data line, greatly reducing the costs of traditional wiring, saving large cross-section wire consumption, reduce the investment cost of building developers and maintenance cost, shorten the installation period (about 20%), improve the rate of return on investment;
4, protection of lamps and lanterns: traditional switch control, due to the impact voltage and surge voltage on the power grid, easy to damage the lamps. Intelligent lighting control system, the lighting power supply through the dimming module control and adjustment, so the power quality is higher, can avoid the impact of the power grid voltage and surge voltage, in addition, due to the introduction of soft start and soft turn off technology, can prolong the service life of the lamp 2-4 times;
5, flexible control mode: using advanced power electronics technology, not only can achieve single point, double point, multi point, area, group control, scene setting, timing switch, centralized monitoring, but also can optimize energy utilization and reduce operation cost.
6, according to the change of users' needs and external environment, we only need to modify software settings instead of reconstructing lines, we can adjust the layout and expansion functions of lighting, greatly reduce the cost of retrofitting and shorten the transformation cycle, and are suitable for different requirements.
7, automatic reset function: when the building after the power failure, because each input system output unit are stored system state control command and MRENG lighting control, so the power supply is restored, the system according to the preset state to resume normal work, to achieve unattended, improve the management level;
8, carry out effective maintenance: use the self diagnostic function, monitor the state of the equipment at any time, and deal with the failure in time.

Three. Design basis
＊ "general code for civil architecture design" GB503522005
＊"Code for electrical design for civil buildings" JGJ/T 16-92
＊"Intelligent building design standard" GB/T50314-2000
＊ "intelligent building evaluation standard" DG/T08-2001
＊"Standard for acceptance of quality of intelligent building engineering" GB50339-2003
＊"Code for construction and acceptance of intelligent buildings" (DG/TJ08-601-2001 J10099-2001)
＊The standard atlas of the national standard design electrical equipment and the atlas of the construction electrical installation engineering

Four, product selection
4.1. Company introduction
Bogor Networking Technology Co., Ltd. is committed to the research, development and design of the lighting control system. It is widely used
At present, more than 200 intelligent lighting projects have been completed in public buildings, stadiums, exhibition centers, shopping malls, villas, mansions, high-end hotels, office buildings and large supermarkets. The stability of the system, significant energy saving characteristics, in the practical application of the owners of the consensus.
As far as lighting control system is concerned, Bogor Hong Kong Network considers not only the combination of lighting and lighting scenes, but also the economy, reliability and practicability of the system, and the energy saving characteristics of the system after operation, as well as the intelligence level of the whole building.
4.2, an overview of the principle of intelligent lighting system for Bogor network
The HM lighting control system is a two wire intelligent control system, which is mainly used for the control of the lighting system.
In addition, it can also interact with other systems such as background music, fire protection, security and other systems.
All units of the unit (except power) are embedded with microprocessors and storage units, which are connected to a network by a pair of signal lines (UTP5).
Each unit sets the unique unit address and sets its function with the software, and controls the load of each circuit through the output unit. The input unit establishes a correspondence through the group address and the output component. When input is present, the input unit transforms it into digital signal and broadcasts on the system bus, and all output units receive and make judgement to control the output of the corresponding circuit.
The M-IoT lighting control system is connected to the network through two buses. The bus not only provides a 12 volt DC power supply for each component, but also loads the control signal. The logic correspondence between the control switch and the output circuit is established by system programming. HM-IoT lighting control system components are modular structure, and have systematic products, system expansion is convenient. At the same time, through special interface and software components, can directly access the computer real-time monitoring, or access to Ethernet for remote real-time monitoring. Therefore, it is more simple and flexible in design. The HM -IoT lighting control system is distributed control, modular structure and high reliability. Any control modules are built in CPU, each input module (scene switch, multi key switch, infrared sensor) can be directly with the output module (dimmer, relay output) communication (to send instructions to accept instructions to execute instructions), avoid the centralized structure of the central CPU failure caused by paralysis of the entire system. Integrated with BA system, HM lighting control system is an open system. It can be easily connected to other systems through special interface software, such as building automation system, access control system, security monitoring system, fire fighting system and so on.

4.3. System structure diagram

4.4. System topology diagram

Five. A brief introduction to the product
5.1, HM-IoT intelligent lighting system is composed of system equipment, lighting controller, field device (such as programmable switch, various inductors).
5.2, system equipment: installed in the central monitoring center, monitoring all the lighting circuits of the whole system, it can effectively analyze and manage all the devices of the entire lighting control system.

5.3, light automatic induction management
All lighting can be set according to the luminance sensor to automatically detect the ambient light and complete the automatic switching of opening / closing of the day / night. Make management and energy saving more scientific and orderly. For example, the stadium lighting can be judged by luminance sensor, and the ambient brightness is 1000 lumens, then some lights are automatically opened, and the illuminance of the stadium is compensated.

5.4. Monitoring and monitoring of light power information
The data of the lighting system can be collected regularly, such as the voltage and current value of the circuit in each electric box, so that the use of lamps can be easily mastered. The real-time monitoring and tracking of power supply can automatically and smoothly regulate the voltage and current amplitude of the circuit, improve the extra power consumption caused by the unbalanced load in the lighting circuit, improve the power factor, reduce the working temperature of lamps and lines, and achieve the purpose of optimizing the power supply.

5.5, environmental information monitoring
It can collect real-time environmental information, such as indoor and outdoor illumination, temperature, humidity and so on, so as to understand the indoor and outdoor environment in time, and control the corresponding system.

5.6. Linkage of environmental information
With the linkage control of other systems (curtain system air conditioning system, etc.), and according to the collected indoor and outdoor illumination automatically adjust the indoor lighting scene changes, meet the intensity demand; according to the temperature and humidity of the collected data, timely adjustment of air temperature and wind speed, in order to maintain the indoor temperature and humidity in the most comfortable

7.5, light loop control
To meet the needs of the factory for lighting and rest control. The lighting loop of the factory can be connected to the intelligent lighting control system. Then, according to the rule of the light used in factories and commuters, the preset good lighting scenarios can be preset at different time periods, which can be programmed in a weekly period, and preset the corresponding lighting scenes at different times. The humanized realization of the working time lighting circuit management.

5.7 light loop control
All lighting can be set according to the luminance sensor to automatically detect the ambient light and complete the automatic switching of opening / closing of the day / night. Make management and energy saving more scientific and orderly. For example, the stadium lighting can be judged by luminance sensor, and the ambient brightness is 1000 lumens, then some lights are automatically opened, and the illuminance of the stadium is compensated.

5.8 system gateway
A log has been added to record the connection of each circuit on each module, query and return the details of the data, including time, module ID, and so on. When a circuit is disconnected, will show the details (such as open circuit module and ID on the way), convenient inspection and maintenance personnel.

7.6. The definition of light time pattern
According to the change of seasons, commuting time and illumination, the time is preset on the software interface and the lights are regularly controlled. The intelligent control module can invoke the corresponding scenes according to the user's preset time. If the lights are automatically opened at work, some lights are automatically dimmed or closed at work.

5.10. Control of dimming circuit
The intelligent lighting module can provide the most comfortable lighting with the most economical energy consumption. The system can ensure that the lights are lighted or the required luminance is achieved only when necessary, which greatly reduces the energy consumption of energy.

5.11, combined lighting
It provides a constant, low ripple DC12V power supply for the system module.

5.12, combined lighting (real time monitoring of carbon dioxide concentration in air)

5.13, combined lighting (PM2.5 dust sensor)

5.14. Human body induction coordination
By combining with the human body sensor, the area where the flow of a part of the person is not large is automatically opened / closed according to whether it is automatically judged. Such as: the staircase, the toilet, may consider using the human body induction to judge the light control. That is: someone is bright, and people turn off the lights for 1 minutes after they go.

5.15, combined lighting
The combination of electrical equipment and lighting can be automatically controlled through the setting of "scenario". Such as: water fountain and fountain, can be opened according to set timing, and can make lighting and fountain coordination. So the camp made another wonderful atmosphere.

5.16, coordinated lighting control
The various lighting loops in the area can be connected to the control system. The 7 inch LCD multi-function touch panel can be placed at each entrance. The control interface can be turned to page, up to 5 pages, which is enough to achieve the demand of multi point control and centralized control in large area of the workshop.

Six. System structure diagram

Seven, product advantage

Eight. The design of the school intelligent lighting control system
The teaching environment should not only have enough work lighting, but also need a comfortable visual environment. Lighting has become a major factor that directly affects the learning and working efficiency of teachers and students. Therefore, people have paid great attention to it. To do a good job in lighting design and to strengthen the design of lighting control has become an important part of building a modern school.
8.1 classroom and dormitory lighting
The classroom is a place for students to learn, so the light and brightness of the classroom is particularly important. In the classroom to reduce light, mainly in the fully open and fully closed, which can increase management efforts, energy saving, saving management costs.
The students' dormitories are controlled by timing: the same time control, the same management, to ensure that the students go to bed on time and save the cost of management.
Control mode
1, central control: in the main control center of all lighting circuit monitoring, through the computer operation interface to control the lights switch.
2, timing control: daytime, evening, night, late night and other timing control.
3, field programmable switch control: through the programming method to determine each switch key control loop, single key can control a single loop, multiple circuits.
8.2 leading office lighting
Using a variety of adjustable light source, according to the needs of the lighting circuit through the system default of different light and dark collocation, produce a variety of visual effect, so do (such as office, reception, leisure and other lighting scenes), when just press a button to invoke the desired scene lighting scene.
For example: the leadership work, just click on the front of the control panel on the "office" button, the embedded fluorescent lamp in front of the room, with a red filter manager behind chandelier lens lamp, manager and located in the edge, the wall of the column lamp can automatically and directional respectively 80% to 20% soft light illumination, create a quiet, lively, but also solemn effect; the manager seated, if a visitor, the manager just click on the "reception" button, automatically dimming the chandelier, the manager behind the front of the cold light source lamp, fluorescent lamp, wall lamp, column edge orientation and is located in the middle of the room low voltage lamp, lamp slot wall lights are brighter in 80% to 20%, bring out the style of the room and represents a bright, friendly and welcoming; lunch break, just click the "leisure" field View button, the main lighting in the room all dim brightness lamp slot wall lamp, the lamp and the manager behind the wall column edge, lamp dimming to 20% directional respectively, express a warm and comfortable atmosphere, the manager left, click "OFF" button in the room light can delay a few seconds or minutes after slowly dimmed to extinguish. Control mode: central control (monitoring of all lighting circuit in the main control center through the computer interface control light switch timing control (usually), cleaning, holidays, morning, meals and other timing control field programmable control (switch) to programmatically determine the control switch of each loop, speed control single loop and multi loop)
.3, school multi-function hall lighting
The multifunctional hall podium lights with lamp and dimming the lights, the audience lighting ceiling lamp, lamp and lamp based column groove. The platform can increase the stage lighting to meet the needs of the performance, and its control is controlled by the stage lighting and audio professional equipment. Multi function hall can set up a variety of modes according to the different function of its use.
Such as:
Report mode: should highlight the image of the spokesman, chairman of Taiwan lamp brightness to 70%-100%, transparent lamp appropriate opening, in order not to affect the audience feel spokesman for the principle; to downlight (80% brightness), convenient assembly personnel records, and all open wall.
Projection mode: podium left narrator location in the 50% lamp brightness;
The audience in front to gradually increase from the lamp lights, wall lamps all open.
Discussion model: all lights are opened, brightness 90%-100%.
Admission mode: the audience lights lamp and wall lamp post slot, all open 100% brightness, brightness 50% podium downlight.
Exit mode: the audience lights lamp and wall lamp post slot, all open 100% brightness.
Field model: Chairman of Taiwan and the audience were downlight downlight brightness in 70%. All the above pattern scene changes are set to fade in and fade out for 1-100 seconds, and the scene switching does not affect the conference process and visual effect.
Convenient staff usually out of the place, the two key switch is arranged in the multifunctional hall, when the need to enter when just click the switch, automatically open part of indoor lighting, meet the visual effects; when the clearance is over, the door is closed, just click on the cleared switch, can shut off all lamps. In addition, a panel is installed in the sound control room. During the meeting, the outdoor control panel can be shielded, so that there will be no operational errors due to guest contact. At the end of the meeting, after the departure of the guest, the panel of the voice control room can be shielded so that the school operators can be used normally.
Control mode:
Central control (control all lighting circuits in the main control center, control the light switch through the computer operation interface)
Field programmable switch control (programmed by way of each switch button to determine the control of the loop, single key can control a single loop, multiple loops) dimming control (from 0% illuminance to 100% illumination continuous stepless dimming control).
8.4 stadiums and stadiums and gymnasiums
The school sports venues can mainly carry out basketball, volleyball, badminton, table tennis and other sports events, as well as exhibitions and other activities. In this application, the intelligent lighting control system is composed of switch module, dimming module and programmable control panel. Each switch cabinet has 8 circuit switches output, each road 10A, each road control 1 - 3 sets of 650W gold halide lamp, the system can achieve the following functions:
1.) field lighting can be set up to 12 kinds of light mode, can achieve a variety of game requirements according to the needs, such as "race", "game", "basketball, volleyball, table tennis," clean "and" safe "arbitrary lighting mode. The audience I may achieve 4 different lighting scenes.
2.) the system can automatically adjust the sequence of the opening of various site lights, and avoid the start of large current shock caused by the simultaneous lighting. For example, before the beginning of the basketball match, the full field lights will be lit up in a specified order. The system can restrict the interval time of the restart of the metal halide lamp, which is conducive to improving the life of the metal halide lamp.
3.) if the operation is simple and intuitive, after the system is debugged, users can press the key on the control panel and the system will automatically enter the corresponding preset state of the key. For example, before the beginning of the basketball match, the staff only needs to press the corresponding basketball key, and the intelligent lighting control system can lighten the lights needed for the basketball court.
4.) the system set up three control operating points, in the distribution room and the hall can control the main site and the audience seat.
Control mode:.
Central control (in the main control center for all lighting circuit monitoring, through the computer operation interface to control the light switch).
Field programmable switch control (programmed by way of each switch button to determine the control loop, single key can control a single loop, multiple loops) dimming control (from 0% illuminance to 100% illumination continuous stepless dimming control).
8.5, public area lighting
Corridors and bathrooms are essential in schools. The lighting in each corridor is the best way to embody the energy saving characteristics of intelligent lighting, and intelligent lighting system can manage effectively. When the intelligent lighting is not used, when the aisle is not passed, the lights still shine, which is a great waste of electricity. The intelligent lighting system can set up the 1/3, 2/3 scene, and switch freely according to the situation. You can also set the time control in the daytime, the outdoor sunlight, only need to open the 1/2 or 1/3 scene mode; in the evening, outdoor sunlight gradually reduced, then the highest when the flow of people is also one day, corridor lights should be fully open until midnight; when nobody, automatically turn off all the lights so; the maximum energy saving. There is a manual control switch at each entrance, and the switch of the local lamp can be manually controlled according to the need.
Control mode:
Central control: control all lighting circuits in the main control center and control the light switch through the computer operation interface.
Timing control: daytime, evening, night, late night and other timing control.
Lamp control: use the way of separating light to distinguish the lighting circuit, so as to realize 1/3, 2/3 and 3/3 illumination control.
On-the-spot programmable switch control: the circuit controlled by each switch key is determined by programming. Single key can control single circuit and multiple circuits.
8.6, building landscape / floodlighting
The distance between each lighting circuit of outdoor floodlighting is far away, and the power of each circuit is larger. If ordinary lighting is used, it is very troublesome to control and it is difficult to switch on time. You can use intelligent lighting for outdoor lighting using a variety of control methods, such as the late 6 opened the whole lighting landscape lighting, landscape lighting lamps 11 part closed, leaving only 12 points after the necessary illumination, the specific time can be adjusted automatically according to the change of the length of the day and night and holidays throughout the year. The control panel can also be controlled by the control panel according to the situation.
Through time management automatic control mode: the module has 365 day clock management function, it can be automatically managed according to the time programmed according to the programmed program, and it is very simple and convenient. In addition, all controlled lamps are controlled by unit time, week and day.
Through the control panel control: each control panel and intelligent control module can store 200 preset scenes, and can be invoked at any time when needed. The control panel is placed in a place where managers are manipulated to avoid personnel contact and prevent misoperation.
In addition to the time to control the outdoor lighting, intelligent lighting can also be controlled by the illumination sensor. Using the illuminance sensor, the system controls the outdoor floodlighting automatically according to the illuminance of the outdoor sunlight, which not only saves energy, but also improves the whole level of intelligence.
Control mode:
The central control (monitoring of all lighting circuit in the main control center through the computer interface control light switch) timing control (usually, holidays, evening, night illumination etc. timing control) induction control (according to the outdoor daylight illuminance control) field programmable switch control: determine the fully open and fully closed keys by programming the way.

Nine. Enterprise culture

Hung Bogor Network Technology Co. Ltd. (Shenzhen, Dongguan) is a Hong Kong cooperation enterprises, the main products from the Internet of things, smart buildings, smart city, hotel intelligent control, public lighting control, lighting control, intelligent control of the Home Furnishing GA and production and sales of high-tech companies, has a team of more than 50 hardware and software the product development team, independent research, design, development, and have independent intellectual property rights, trademarks and patents and certification.
Enterprise vision: to become a first-class intelligent brand enterprise, leading the development trend of intelligent technology.
Enterprise mission: creating international first-class intelligent products and helping China become an intelligent power. Enterprise values: altruism, benevolence, innovation and win-win.
Enterprise team: the sun warm, honest, faithful and conscientious, of one heart and one mind.
Enterprise concept: quality for life, innovation as the driving force, constantly improve self, wholeheartedly for the customers.
Enterprise service slogan: to develop the best quality products with the most rigorous work attitude, and return the trust of the users with the best quality product performance.

Ten. Quality system