Hello! Welcome to the official website of Dongguan Hung Mao Internet of things technology Technology Co., Ltd.
4Solution

The foundation of the design of the exhibition hall
The exhibition lighting plays an important role in highlighting the exhibits and enhancing the space atmosphere. The lighting design of the exhibition includes 3 forms of natural lighting, artificial light source lighting and both comprehensive lighting and lighting. But for commercial exhibition, because of its short exhibition period and high illumination level, most of them use artificial lighting or natural light and artificial light source to combine two forms of lighting (except outdoor display).
1. The basic requirements of the exhibition lighting design
1.1 illuminance
Different display items, the required illumination values are also different. Such as food, groceries, books and flowers to 100-500lx; dark textiles, jewelry and leather crafts need 200-1000 LX; 300-500lx; 100-200lx appliance machine.
1.2 luminance distribution
At the exhibition, the theme of the exhibition should be the brightest part of the field of vision. Light sources, lamps and lanterns do not attract attention, in order to help the audience to focus on the ornamental exhibits. The highlight of the exhibits, often using local lighting to strengthen its surrounding environment brightness contrast.
The distribution of ambient brightness determines the visual adaptation of the audience. Between different illumination levels in different rooms, especially dark room corridor, the lighting area should be provided gradually, so that the audience from bright to dark environment space not to have a dim sense, reduce the viewing interest.
Exhibits background brightness and color do not take. The ratio of the brightness of the exhibits to the background is good between 1:3 and 3:1. In general, the background should be glossy, colorless (or pale, gray) ornamental.
1.3 reflection and glare
It is very important to avoid the interference and glare of the audience in the exhibition space. In the preliminary planning and organizing stage, the position of the windows and lamps and the distribution of the illuminance of the exhibition hall should be carefully considered. First of all, direct glare should be prevented. For example, daylighting should be strictly shielded from direct sunlight. Artificial light should have enough shade angle, followed by preventing light interference. There are several cases of anti - interference:
1. Light source through a mirror glass or other shiny surface reflection glare caused by the eyes of the audience, as a reflection.
The brightness of the audience itself or other items. The higher surface brightness exhibits, reflection or gloss appear on the glass surface, is two times of reflection.
3. In shiny material exhibits the reflection curtain.
In order to avoid the primary reflection, the lighting source of the plane exhibits should be arranged outside the reflected interference area. If the illuminance of the exhibit can be higher than the general illumination level of the exhibition hall and the illuminance of the audience area, the two reflection can be weakened.
The color of 1.4 light sources
Due to the color adaptation of the vision, when the daylight is illuminated, whether it is sunny or cloudy, as long as there is enough illumination, the color of the object will always remain constant. So from the point of light color, natural light is an ideal light source. If the artificial lighting is used, in order to maintain the inherent color of the exhibits, the choice of sunlight light source is ideal.
1.5 flexibility
Commercial exhibition is very active and short cycle. In order to adapt to this requirement, it is best to use flexible light guide and point shooting lamp with general lighting. There are natural lighting rooms, shading devices must have manual or automatic control, for when illumination changes, adjust the flux at any time.
1.6 security
Attention should be paid to the heat dissipation of the light source, and the power consumption should not exceed the power supply load to ensure that the exhibition is carried out smoothly and safely.
2. The form of exhibition lighting
Commonly used lamps for exhibition lighting include incandescent lamps used for general lighting, daylight and cold white fluorescent tubes used for top or showcase, small spotlights for key lighting and color lamps for creating atmospheres. They should be selected according to specific circumstances.
The forms of the exhibition lighting are as follows:
1. The lamp ceiling and showcase for well shaped grille or shading plate (showcase) block, make direct light below or oblique.
The magic box. The side wall (flat or curved) reflection lighting, light should be uniform and soft.
3. The top and side wall showcase mixed lighting.
The lighting lamp can be used. The layout of groove or slot lamp.
⑸.重点突出的展品照明需采用聚光灯。
6. Create some kind of atmosphere or background can use cold light or lights irradiation.
7. According to the design requirements, can organize advertising or other light.
3. Design basis of intelligent lighting
General code for civil architecture design GB503522005
"Code for electrical design for civil buildings" JGJ/T 16-2008
"Intelligent building design standard" GB/T50314-2006
"Quality acceptance standard for intelligent building engineering" GB50339-2003
4, product selection
4.1. Company introduction
HM-IoT is committed to the research, development, design and manufacture of lighting control system. It has been widely applied to hotels, office buildings, museums, public buildings, stadiums, exhibition centers, villas, mansions, etc., and thousands of intelligent lighting projects have been completed. The stability of the system, significant energy saving characteristics, in the practical application of the user's consistent praise.
4.2. An overview of the system principle
The HM-IoT lighting control system is mainly used for the control of the lighting system, and can also be linked with the fire control system. All modules (except power) are built-in microprocessor and memory unit, each unit is the only unit address and set its functions by software, each input module (scene switch, multi key switch, infrared, microwave, optical sensor etc.) can be directly with the output module (scene switch, relay output) communication (send instructions to receive instructions to execute instructions), avoid the centralized structure of the central CPU failure caused by paralysis of the entire system. The input unit establishes a correspondence through the group address and the output component. When input is present, the input unit transforms it into digital signal and broadcasts on the system bus, and all output units receive and make judgement to control the output of the corresponding circuit.
The system is connected to the network through 1 buses. The bus not only provides a 12 volt DC power supply for each component, but also loads the control signal. The logic correspondence between the control switch and the output circuit is established by system programming. The HM-IoT lighting control system adopts the modular structure and the system is extended conveniently.
At the same time, through the special software, the computer can be used to monitor the real time directly with the computer, or to access the Ethernet for remote real-time monitoring.
4.3 system architecture diagram:
5. System design scheme
1 reception area lighting
Reception area is the only way for guests to enter the exhibition hall. It is the first feeling to visit the exhibition hall. The selection and arrangement of lamps and lanterns are not only for the needs of the lobby lighting, but also the lighting atmosphere and the coordination between lighting and building decoration. The reception area, as a pavilion, should provide the staff with a comfortable, elegant and elegant light environment to the maximum extent. The intelligent lighting control system adopts intelligent relay module, dimming module, intelligent control panel, illumination sensor and so on. It has lighting, manual dimming and automatic dimming function. According to different time and external environment, different lighting effects can be set by software programming. Lighting can be flexibly segmented and transformed according to temporary needs, so as to achieve energy saving. The automatic operation of the public lighting area can be realized by setting the control mode of the clock, so as to facilitate the management and the personnel on duty. Through the intelligent control panel, a variety of lighting effects can be preset and combined into different lighting scenes. When you need to change the lighting scene, just press the button and you can change the lighting scene. Through the outdoor illuminance sensor, the lighting of the reception area can be automatically adjusted according to the intensity of outdoor solar light. Make full use of natural light to save energy. The use of intelligent lighting dimming control system can successfully suppress the impact voltage and surge voltage of the grid, so that lamps and lanterns will not be damaged due to excessive voltage and prolong the life of lamps 2-4 times.
Control mode:
The central control (monitoring of all lighting circuit in the main control center through the computer interface control light switch) timing control (set during the day, evening, night and holidays. The illuminance sensor control (mode) according to the outdoor daylight illuminance control), field programmable switch control (programmatically determine control each button switch circuit, control circuit, single single multiple loop), dimming control (from 0% to 100% lux illumination stepless dimming control)
2. office area:
The whole office area is divided into several independent lighting areas, the programmable switch is adopted, and the lighting of the corresponding area should be opened according to the needs. Realize the multi - point control in the office and facilitate the use of personnel. All the lights in the entire office area can be opened and closed at every entrance and exit, so that the lights in the office area can be easily controlled according to the need. At the same time, it can be controlled according to the time, for example, at 6 o'clock in the evening, turn off the light automatically. If someone works overtime, it can switch to a manual switch light. In this way, it is not only convenient to use the personnel, but also reduces the waste of electric energy, protects the lamps and lanterns, and prolongs the service life of the lamps. At the same time, the curtain control module is added, and the lighting system is linked. When the outdoor light is strong, the curtain can be lowered, and the curtain outside is weak. Control mode: central control (monitoring of all lighting circuit in the main control center through computer operation interface control light switch timing control (usually), holidays, overtime and other timing control) field programmable switch control (programmatically determine each switch button control circuit, control circuit, single bond multiple loop).
3 manager's Office
Using a variety of modes of light source, can be preset lighting circuit through the system of different light and dark collocation, produce a variety of visual effect, making the manager always keep the soft and elegant lighting environment (such as office, reception, leisure and other lighting scenes), when just press a button to invoke the desired scene the lights of the scene. For example: a manager at work, just click on the front of the control panel on the "office" button, the office automatic and soft light 80% to 20% of the illumination, create a quiet and lively, but also solemn effect; the manager seated, if a visitor, and only through the remote controller picked up a hand to press the "reception" button, the office lights automatically switch to the reception mode, the curtains and lighting system linkage, bring out the office style and represents a bright, friendly and welcoming; lunch break, just click the "leisure" Scene button, the main lighting in the room dimmed, comfortable the atmosphere. The manager left, click "OFF" button, the lights in the room can delay a few seconds or minutes after go out, and the curtain can be set according to the automatic rising or down.
6, HM part of the product profile

Intelligent control host
Bogor networked intelligent control host is a new field of intelligent lighting energy management. It will not only provide a single lighting use, it is also the whole intelligent lighting, electrical appliances, curtains and other equipment control center.
6.1. Lighting control system software
The software Public Time Control System of Hong Bogor networking lighting control system has the characteristics of stability, effective management and control system, friendly interface and simple learning. Moreover, it is well compatible with the TCP/IP network, and can also be controlled on the network now. The main functions of the central monitoring software are as follows: monitoring the lighting state and controlling the field loop through the interface software.

The following main functions can be accomplished through the central monitoring software:
Real-time monitoring: the operator can observe the actual switch state of the lamp on the screen, and can control the various circuits by clicking the lamp figure by the mouse. Scene control: a variety of scene patterns can be set on the software menu, and the system is automatically executed when it is used only by clicking on the corresponding mode. The scene pattern can be reduced and modified according to the needs.
Time control: the time control program is compiled according to the season, the time and the change of the illuminance, and the circuit is automatically switched on the program. Data acquisition: the system can collect all the data of the lighting system regularly, so it is easy to master the use of electricity.
System security: setting up security password in monitoring software, limiting the permissions of different operators, and performing different operations according to users' requests of different permissions.
6.2, tablet computer, cell phone control flow chart
6.3, curtains control:
6.4, lighting scene control:
6.5. The function of voice play:
7.2, combined lighting
It provides a constant, low ripple DC12V power supply for the system module.
Functional characteristics:
Name / model: 42W12V system power HM-1235
1. International wide voltage standard, 110 to 220V voltage can be input.
Two. Redundant power supply function,
Three, 12VDC/3.5A output state detection,
Four. Over temperature automatic regulation and protection function,
Five, overload, over current, short circuit protection function,
Six. The indicator of the power output indicator,
Seven, the 2.54 line 485 bus communication terminal plug connection, extended mode. Stable and reliable connection, eliminating weak wire trouble
Eight, installation way: Standard 35mm guide type installation
Nine, operating temperature / humidity: -10~70 C /20%~92%RH,
Ten. Storage temperature / humidity: -0~50 C /20%-92%RH,
Eleven, high strength elastic hot Shuo and strong flame-retardant shell
Twelve, 4 modulus widths (one modulus =18MM)
Thirteen. The appearance size (long * width * high) 90.0*72.0*65.0 (MM)
7.3. System gateway
A log has been added to record the connection of each circuit on each module, query and return the details of the data, including time, module ID, and so on. When a circuit is disconnected, will show the details (such as open circuit module and ID on the way), convenient inspection and maintenance personnel.
Functional characteristics:
Name / model: Ethernet gateway controller -HM-10/100TCP/IP
First, up 10M Ethernet Serial 485 device to TCP/IP network and TCP/IP two, network to serial port 485 device data transparent transmission.
Three, an infrared probe, (parallel port) input interface, the realization of human infrared induction control bus output.
Four, 4 sets of scene programming output interfaces.
Five, a fire control 24V input signal control, with the fire automatic alarm system, fire signal power when the arrival of automatic opening system in advance set circuit.
Six. It has 5 operating modes, such as TCP Server, TCPClient, UDP, virtual serial port, point to point connection and so on.
Seven. It has the function of programming and debugging and management.
Eight, high strength elastic hot Shuo and strong flame-retardant shell
Nine, installation way: Standard 35mm guide type installation
Ten, specification: (long * width * high) 90.0*72.0*65.0 (MM)
Eleven, 4 modulus widths (one modulus =18MM)

7.4. Linkage of environmental information
With the linkage control of other systems (curtain system air conditioning system, etc.), and according to the collected indoor and outdoor illumination automatically adjust the indoor lighting scene changes, meet the intensity demand; according to the temperature and humidity of the collected data, timely adjustment of air temperature and wind speed, in order to maintain the indoor temperature and humidity in the most comfortable
Functional characteristics:
Name / model: 2 DC curtains controller HM-0600CL
One, 2 Road curtains control, special control electric equipment: curtain switch, roll gate switch, elevator and so on,
Two. Custom travel time, delay start and closing function,
Three. Each circuit has a manual button switch.
Four. An independent programming scenario mode for each loop,
Five. Independent power memory function,
Six. It has remote programming and management functions.
Seven. Standard RS485 bus communication extension.
Eight, controlled loop: 6 road 10A, interlocking function
Nine, relay life: more than 60000 times,
Ten, power supply voltage: DC12V (2.54 line input terminal plug,
Eleven. Control mode: RS485 bus and one to one control,
Twelve, installation way: Standard 35mm guide type installation
Thirteen, operating temperature / humidity: -10~70 C /20%~92%RH,
Fourteen. Storage temperature / humidity: -0~50 C /20%-92%RH,
Fifteen, high strength elastic hot Shuo and strong flame-retardant shell
Sixteen, 4 modulus widths (one modulus =18MM)
Seventeen. The appearance size (long * width * high) 90.0*72.0*65.0 (MM)
Eighteen. Support remote parameter setting and program upgrade
7.5, light loop control
To meet the needs of the factory for lighting and rest control. The lighting loop of the factory can be connected to the intelligent lighting control system. Then, according to the rule of the light used in factories and commuters, the preset good lighting scenarios can be preset at different time periods, which can be programmed in a weekly period, and preset the corresponding lighting scenes at different times. The humanized realization of the working time lighting circuit management.
Functional characteristics:
Name / model: 4.8 16A intelligent controller HM-0416ZM
One, 4 relay switch output,
Two. The maximum 16A output of each circuit,
Three. Each circuit has a manual button switch.
Four. An independent programming scenario mode for each loop,
Five. Independent power memory function,
Six. It has remote programming and management functions.
Seven, the 2.54 line 485 bus communication terminal plug expansion.
Eight, loop switch load (resistance): 4 16A AC250V
Nine, relay life: more than 60000 times,
Ten, power supply voltage: DC12V (2.54 line input terminal plug,
Eleven. Control mode: RS485 bus and one to one control,
Twelve, installation way: Standard 35mm guide type installation
Thirteen, operating temperature / humidity: -10~70 C /20%~92%RH,
Fourteen. Storage temperature / humidity: -0~50 C /20%-92%RH,
Fifteen, high strength elastic hot Shuo and strong flame-retardant shell
Sixteen, 4 modulus widths (one modulus =18MM)
Seventeen. The appearance size (long * width * high) 90.0*72.0*65.0 (MM)
Eighteen. Support remote parameter setting and program upgrade
7.6. The definition of light time pattern
According to the change of seasons, commuting time and illumination, the time is preset on the software interface and the lights are regularly controlled. The intelligent control module can invoke the corresponding scenes according to the user's preset time. If the lights are automatically opened at work, some lights are automatically dimmed or closed at work.
Functional characteristics:
Name / model: intelligent scene timing module Ai/CTL1.20.2
One, cycle by day, week, month and year,
Two, 2 relay control output, 1 20A output, 1 road 10A output,
Three. With a manual button switch,
Four, programmable timing implementation of scene and area control,
Five, Bluetooth wireless connection, mobile APP download time setting, opening and closing time settings: XX hours: XX minutes,
Six. The setting of repeated time is set up in days, weeks, months and years.
Seven. The normal work and state memory of the internal clock after power off
Eight. Control mode: Standard RS485 communication
Nine. It has remote programming and management functions.
Ten, relay life: more than 60000 times,
Eleven, the power supply voltage: DC12V (5 input terminal plug)
Twelve, installation way: Standard 35mm guide type installation
Thirteen, operating temperature / humidity: -10~70 C /20%~92%RH,
Fourteen. Storage temperature / humidity: -0~50 C /20%-92%RH,
Fifteen, high strength elastic hot Shuo and strong flame-retardant shell
Sixteen, 6 modulus widths (one modulus =18MM)
Seventeen. The appearance size (long * width * high) 108.0*88.0*66.0MM
Eighteen. Support remote parameter setting and program upgrade
7.7. Monitoring and monitoring of light power information
The data of the lighting system can be collected regularly, such as the voltage and current value of the circuit in each electric box, so that the use of lamps can be easily mastered. The real-time monitoring and tracking of power supply can automatically and smoothly regulate the voltage and current amplitude of the circuit, improve the extra power consumption caused by the unbalanced load in the lighting circuit, improve the power factor, reduce the working temperature of lamps and lines, and achieve the purpose of optimizing the power supply.
Functional characteristics:
Name / model: 3 40A electric energy detector HM-3040JC
One, can collect the AC three-phase (three way), voltage, current, active power, accumulative power consumption data value,
Two. The maximum 40A independent current monitoring can be connected to each road.
Three, real-time upload each circuit data value, automatic analysis of the circuit voltage, power and other data, real-time upload, can be remote,
Four. Set every circuit voltage, maximum power alarm value, minimum voltage and power alarm value by computer.
Five. It has remote programming and management functions.
Six. Standard RS485 bus communication extension.
Seven. Power supply voltage: AC220V
Eight, installation way: Standard 35mm guide type installation
Nine, operating temperature / humidity: -10~70 C /20%~92%RH,
Ten. Storage temperature / humidity: -0~50 C /20%-92%RH,
Eleven, high strength elastic hot Shuo and strong flame-retardant shell
Twelve, 6.5 modulus widths (one modulus =18MM)
Thirteen. The appearance size (long * width * high) 116*90.0*57.0 (MM)
7.8, environmental information monitoring
It can collect real-time environmental information, such as indoor and outdoor illumination, temperature, humidity and so on, so as to understand the indoor and outdoor environment in time, and control the corresponding system.
Functional characteristics:
Name / model: temperature and humidity sensor HM-CR102
First, the product adopts the digital temperature and humidity sensor,
Two. The large LED mode shows the value of temperature and humidity.
Three. The alarm of the load line and the fault indication of the sensor,
Four, the standard RS485 communication function,
Five. It is suitable for unattended office so that it needs to be automatically heated and controlled.
Six, the user can set the upper and lower limits of temperature and humidity, circulation display mode, communication parameters and so on through key programming.
Seven, this series of products of strong anti-interference ability and strong ability of anti electromagnetic interference
Eight, the equipment ID can be inquired through the Internet and set up.
Nine, high strength elastic thermoplastic box, strong pit impact, strong flame retardancy;
Ten. Working voltage: DC12V
Eleven. Working current: less than 80MA
Twelve, protection mode: built-in temperature protection
Thirteen, installation way: Standard 86 bottom box installation
Fourteen. Single external size: 86.0*86.0*41.0 (MM
7.9, combined lighting (real time monitoring of carbon dioxide concentration in air)
Functional characteristics:
Name / model: carbon dioxide detection sensor HM-86C02
First, the detection principle: non dispersive infrared carbon dioxide sensor (NDIR)
Two, the detection range: 0 ~ 3000ppm or 0 ~ 5000ppm (maximum of 0 ~ 100% orders before selection)
Three. Life span: more than 10 years
Four, accuracy: + 2% ppm (0~3000ppm) @10 ~ 50 C
Five, the response time: 0 ~ 80% 30sec
Six. Data update: 2 seconds
Seven, preheating time: @25 C 90sec 1.
Eight, the working environment: 0 ~ 50 C, 0 ~ 95%RH Non Condensing
Nine, storage environment: -20 C ~ 70 C
Ten, output: analog output: 4-20Ma, 0-5V, 0-10V, 2 digital output: RS485
Eleven, input voltage: DC12V + 100mV Input (recommend 12V)
Twelve, the current consumption: Peak 150mA Low 25mA, (@12VDC)
Note: (1) the output data in the preheating time is 0ppm, and the sensor has a self-examination process.
The range of the analog signal corresponding to the sensor is a linear signal.
Thirteen. The appearance size (long * width * high) 86.0*86.0*65.0 (MM)
7.10, combined lighting (PM2.5 dust sensor)
Functional characteristics:
Name / model: PM2.5 dust sensor HM-CGPM2.5
1. The PM2.5 detector can detect the content of PM2.5 particles in the ambient air in real time. The concentration value of the liquid crystal screen and the number of RS485 can be displayed on the scene.
The word communication method sends the data back to the terminal control system.
Two, the tester is applicable to students' classrooms, residential quarters, old homes, shopping malls, hospitals, Gaestgiveriet Hotel, exhibition halls, apartments, villas, commercial buildings,
The office, the conference room, and other occasions,
Three. The wall mounted installation has the advantages of simple installation, convenient operation, stable working state and high measurement precision. L
Four, sensor type: degree light scattering
- five, resolution: 1 fand g/m
- six, G - measurement range: 0to500
Seven, size: 0.3to2.5 - M
Eight, accuracy: + 5 g (0to50 g) + 15% (50to500 g).
Nine. The source of calibration: TSI8530.
Ten, noise: 11to16dB (A).
Eleven. Working temperature: 0to50 C.
Twelve. Storage temperature: -20to60 C.
Thirteen, operating humidity: 0to95%RH, non condensate
Fourteen. Detection time constant: 20-60 seconds.
Fifteen. Input voltage: DC_12.0V + 100mV.
Sixteen, communication mode: serial communication (standard RS485, more stable communication)
Seventeen. The average time before failure (MTTF):20000 hours.
Eighteen. Size: 700 x 112 x 45.2mm.
Nineteen, quality: 280g. Color: silver white material: ABS+PC
7.11, light automatic induction management
All lighting can be set according to the luminance sensor to automatically detect the ambient light and complete the automatic switching of opening / closing of the day / night. Make management and energy saving more scientific and orderly. For example, the stadium lighting can be judged by luminance sensor, and the ambient brightness is 1000 lumens, then some lights are automatically opened, and the illuminance of the stadium is compensated.
Functional characteristics:
Name / model: illuminance sensor As/SRDB0G.00.1
1. Programmable low power intelligent light illumination sensor.
Two, the device can be opened and closed by programming custom 0-3.4 million Lux light illumination control.
Three, the use of weak light also has a high sensitivity.
Four. It has the characteristics of wide measurement range, convenient use, easy installation and long transmission distance. It is suitable for various places, especially for agricultural greenhouse.
City Lighting and other places. According to the different measuring places, the reliability is high, the linearity is good, and the anti-interference ability is strong.
Five. Standard RS485 bus communication,
Six. Working voltage: DC12V.
Seven, control mode: RS485 bus.
Eight, installation way: hanging wall installation and many other installation methods.
Nine. Single outer size: L110*109*56 (MM).
Eleven, operating temperature / humidity: -10~70 C /20%~92%RH.
Twelve, storage temperature / humidity: -0~50 C /20%-92%RH.
Thirteen. It has rain proof.
Fourteen. Support remote parameter setting and program upgrade.
7.12. Human body induction coordination
By combining with the human body sensor, the area where the flow of a part of the person is not large is automatically opened / closed according to whether it is automatically judged. Such as: the staircase, the toilet, may consider using the human body induction to judge the light control. That is: someone is bright, and people turn off the lights for 1 minutes after they go.
Functional characteristics:
Name / model: human infrared light sensing sensor As/SRDBIG.00.1
One, human body, light intensity two and a programmable human infrared induction, light intensity induction sensor,
Two, intelligent sensing, people (= 20LUX, 21LUX > no effect), lighting equipment automatically open; people from the lighting equipment automatically shut down,
Two, the delay time is less than 3 minutes,
Three, the induction distance: 6M,
Four, induction angle: less than 120 degrees,
Five. Working voltage: DC12V,
Six, installation way: suction top installation (installation hole distance 75MM),
Seven. External size: 86*86*40 (MM)
7.12. Human body induction coordination
By combining with the human body sensor, the area where the flow of a part of the person is not large is automatically opened / closed according to whether it is automatically judged. Such as: the staircase, the toilet, may consider using the human body induction to judge the light control. That is: someone is bright, and people turn off the lights for 1 minutes after they go.
Functional characteristics:
Name / model: human infrared light sensing sensor As/SRDBIG.00.1
One, human body, light intensity two and a programmable human infrared induction, light intensity induction sensor,
Two, intelligent sensing, people (= 20LUX, 21LUX > no effect), lighting equipment automatically open; people from the lighting equipment automatically shut down,
Two, the delay time is less than 3 minutes,
Three, the induction distance: 6M,
Four, induction angle: less than 120 degrees,
Five. Working voltage: DC12V,
Six, installation way: suction top installation (installation hole distance 75MM),
Seven. External size: 86*86*40 (MM)
7.13, combined lighting
The combination of electrical equipment and lighting can be automatically controlled through the setting of "scenario". Such as: water fountain and fountain, can be opened according to set timing, and can make lighting and fountain coordination. So the camp made another wonderful atmosphere.
The field equipment is a programmable panel, which is set by the lighting control software Ai/001BCRJ (based on the use of the site).
Thus, the lighting control system can achieve a kind of intelligent, automatic and humanized effect.
Model: 1-6 - key metal touch switch AL/SRLB01.08.1
1. Programmable low power intelligent touch key.
Two, the customer can decide on the button icon (1-6 keys).
Three. The fashion backlight shows that each button has an independent backlight indication, light and bright.
Four, the unique panel and the execution module separate installation.
Five, can be programmed to customize the instructions of each key, the control use of control.
Six, power supply voltage: DC12V (terminal line input mode).
Seven. Control mode: Standard RS485 bus.
Eight, installation way: Standard 86 bottom box installation.
Nine. Single outer size: 86*86*41 (MM).
Ten, operating temperature / humidity: -10~70 C /20%~92%RH.
Eleven. Storage temperature / humidity: -0~50 C /20%-92%RH.
Twelve. High strength elastic hot Shuo, strong flame-retardant shell, wire drawing aluminum alloy frame.
Thirteen. Support remote parameter setting and program upgrade.
Fourteen, equipment ID number 1~255, can be inquired and set through the Internet computer.
7.14, coordinated lighting control
The various lighting loops in the area can be connected to the control system. The 7 inch LCD multi-function touch panel can be placed at each entrance. The control interface can be turned to page, up to 5 pages, which is enough to achieve the demand of multi point control and centralized control in large area of the workshop.
Functional characteristics:
Name / model: seven inch intelligent industrial screen As/8048K070.1
A 7 "TFT color LCD screen, 1024*600 HD resolution, 16 million color.
Two. Industrial capacitance. ,
Three, the CPU:4 kernel 1.4G is based on the 32 bit RISC architecture, which uses the 28nm technology.
Four, RAM: run memory 512M DDR3.
Five, FLASH:EMMC 8G (supporting the SD card to extend the maximum 32G), six, the system version number: Android 4.4.2.
Seven, 2 standard RS485 communication port.
Eight, working voltage / current DC12V (DC5V) /580MA.
Nine, working temperature: -10~60 C.
Ten, working humidity: 10 ~ 90%RH.
Eleven, structure: aluminum alloy wire drawing face frame, metal shell.
Twelve, shape size: 206 x 142 (unit mm).
Thirteen, installation hole size: 195.6 x 131.6 (unit mm). Fourteen, support JAVA, QT, C# programming and development applications.
Fifteen, WIFI: support WIFI Internet, 802.11b/g/n.
7.15, coordinated equipment control
Functional characteristics:
Name / model: infrared transponder HM-IR009
A programmable low power intelligent infrared learning transponder,
Two. The intelligent infrared transponder can connect the wireless signal to the infrared radio signal and control any infrared remote control by the mobile intelligent terminal.
Equipment, such as: TV, air conditioning, audio, and other equipment,
Three. Standard RS485 communication extension interface,
Four, support wireless transmission, reliable open communication distance is greater than or equal to 100M (120bps), (optional),
Five, remote control range: 120 degrees cone at the top angle,
Six, remote control distance: 10M/ indoor environment,
Seven, instruction capacity: 250,
Eight, the power supply voltage: DC12V (DC5V) 2.54, USB (optional plug, line input terminal,
Nine, installation way: suction top installation, wall mounting and other installation methods, ten, single external size: 110*110*55 (MM)
Eleven, operating temperature / humidity: -10~70 C /20%~92%RH,
Twelve. Storage temperature / humidity: -0~50 C /20%-92%RH,
Thirteen, high strength elastic hot Shuo, strong flame retardant shell,
Eight, product advantage
PWM dimming control: the luminaire (LED) is continuously dimmed in accordance with the demand.
Timing control: according to the sunrise and sunset automatic timing control switch lights, automatic tune light etc.;
Remote control: the switch and dimming control of the lamps and lanterns.
Data report: generate light rate, energy consumption report, use electricity analysis;
Remote upgrade: remotely upgrade the concentrator and controller.
Fault alarm: the alarm of lighting lamps and lanterns is automatically produced.
Line monitoring: according to the node automatic analysis of whether the cable is stolen timely alarm;
Data backup: the data can be imported and exported to ensure the integrity and security of the data
Nine. Enterprise culture
Hung Bogor Network Technology Co. Ltd. (Shenzhen, Dongguan) is a Hong Kong cooperation enterprises, the main products from the Internet of things, smart buildings, smart city, hotel intelligent control, public lighting control, lighting control, intelligent control of the Home Furnishing GA and production and sales of high-tech companies, has a team of more than 50 hardware and software the product development team, independent research, design, development, and have independent intellectual property rights, trademarks and patents and certification.
Enterprise vision: to become a first-class intelligent brand enterprise, leading the development trend of intelligent technology.
Enterprise mission: creating international first-class intelligent products and helping China become an intelligent power. Enterprise values: altruism, benevolence, innovation and win-win.
Enterprise team: the sun warm, honest, faithful and conscientious, of one heart and one mind.
Enterprise concept: quality for life, innovation as the driving force, constantly improve self, wholeheartedly for the customers.
Enterprise service slogan: to develop the best quality products with the most rigorous work attitude, and return the trust of the users with the best quality product performance.
Ten. Quality system
HongMao IOT Technolgy Co.Ltd. Copyright 2018 [Back-stage management] Technical support:[mwth]