The hotel room control system (also called room control system, intelligent room control system, hotel control system, passenger control system), is the use of computer control, communication, management, room RCU (RCU) based on special network, hotel rooms for the security system, access control system, central air conditioning intelligent lighting system, system, service system, background music system for intelligent management and control, real-time reflect the room status, guest demand, service condition and equipment situation, to assist the hotel to the guest room equipment and internal resources to carry out real-time control analysis. Because of its rich function, strong compatibility, and the interface with the hotel management system, it has become an essential part of the comprehensive intelligence of the hotel. Http://www.hongmaocn.com/

First, network communication: adopting the international standard TCP/IP protocol, controls the host RCU to embed 10/100M adaptive fast Ethernet interface. It has strong compatibility and fast transmission speed. It is especially suitable for Hotels with plenty of wine rooms, stable and reliable. The application is very common, the general characteristics of the network without special training, for days after the maintenance.

Two, control panel: the way of using the wall to install the weak power reset switch. Intelligent control is more safe, more humane, beautiful and generous.

Three, air conditioning control: through the network to monitor the implementation of air conditioning system for each room of the hotel, the hotel side according to the preset air conditioning control strategy (schedule), to ensure that does not affect the premise to provide a comfortable environment for the guests, effectively reduce the consumption of cold and heat sources and three speed fan consumption. A large liquid crystal display thermostat with a large liquid crystal display with a communication interface in a single room system. The thermostat itself has a port controlled by a fan and an electric valve. It communicates with the RCU through an internal communication bus, and a RCU can be equipped with up to 16 thermostat modules. This configuration design is especially suitable for suite and presidential suite with multiple thermostat. No need for each thermostat to configure a RCU, it will save much investment and engineering budget. And this way of wiring is simple, the structure is clear, stable and reliable. Because the air conditioner temperature controller module itself has a port controlled by fans and electric valves, even if RCU fails, the air conditioning thermostat module can still work normally without affecting the use of guests. The system software can carry out remote centralized control for each room air conditioning in order to achieve effective energy saving.

Four, intelligent identification card acquisition module: it is different from the traditional bar code recognition switch. It has a built-in M1 (or TEMIC) card reader to read the preset information of the unlocked card to judge the identity of the cardholder. It is a guest, a waitress, or a manager. It communicates with RCU through the internal communication bus, and different identities give different privileges. RCU sends the card identity information to the system server through the communication system, and the room management department can realtime understand the situation of the people entering the room.

Five. Functional Description: http://www.hongmaocn.com/products-132856-0-0.html

(1), unmanned mode

1, in normal rooms rent occupancy patterns in an unmanned;

2, floor communication display and software display room for no one;

3. The air conditioning in the room is operated in unmanned mode and is controlled by the network. Can set the status of their work, in the end software such as: when winter is less than 10 degrees, open the electric valve, start the blower mid-range, reached 14 degrees, stop the fan, the electric valve is closed; in summer when the temperature is above 34 degrees, open the electric valve, start the blower fan to stop the mid-range, 30 degrees close the valve, electric (temperature and wind speed can be set free in the end software set this parameter to log on as administrator) water valve closed;

(two), mode of occupancy

1, in the hotel front desk through the software to check the operating conditions of room equipment, the normal room for rent to the guests

2, the guests check in in the front desk, send an electronic door lock guest card, the guest rooms enter the model (this system is informed of the information from the wine tube software).

3, the air conditioning will automatically switch to the occupancy mode from the unmanned mode. In the occupancy mode, the air conditioning set temperature is the fast cooling / hot temperature (the temperature value is set at the software end), and for high-speed operation, the guest room will reach the comfortable temperature when the guest enters.

4. After the temperature is set to set the temperature, the electric valve is closed and the fan is stopped.

(three), the welcome model

1, guests use the guest card to open the door lock;

2, open the door switch detection, automatic opening and closing the porch light delay of 30 seconds; the lock opening card is inserted into the electric switch, intelligent identification of electric switch, only legitimate cards can take power, light into the welcome mode; if the use of intelligent communication type electric switch, can also be the card holder's identity card as a guest waiter, cards, cards and other management personnel transferred to the system software for display. The system will give different functional rights according to the different identities (such as the waitress card takes electricity, the TV can not get the power for a long time, only 10 minutes power supply).

3, the special light gradually brightens, or is opened according to the set brightness, this way is applicable to the light regulating function.

4, detection of the actual light illumination in the room, such as light light is too weak to open a specific light, this way RCU need to add illumination detection function;

5, the outside display, the floor communication display and the software show the guest room.

(four), general control mode

1. After the end of the welcome mode, the system enters the general mode.

2, guests can control the lighting, TV, curtains and background music by concentrating or dispersing the control panel;

3, the system has multi-channel 220V/3A strong electric relay control output, of which two are multi-stage (10%-100%) dimming switches (mostly used as left and right bed lamps), and the brightness of lights can be varied at different levels.

4, it can regulate and control the switch, channel and volume of the background music.

If the centralized control panel is configured, the current time can be displayed, and the world's six time zone time can be querying.

5, the air conditioner enters the local operation mode, and the guest can operate the temperature control device to control the room temperature according to its own needs.

6, service information such as "clear up", "do not disturb", "please wait", "call service", "SOS" and "check out" in the guest room are sent to outside monitor, floor communicator and software interface in real time.

7, when there is a "call", "SOS" and other information, can not achieve the "do not disturb" service request; "do not disturb" and "please clean up", "please wait", realize interlocking; "do not disturb" outside the state on the display of the "bell" key is invalid;

8, when the guests in the phone or in the bathroom door, if someone press the "bell" button on the control panel, guests can according to "please wait" and "outside the display button," "please wait" window to light, please wait a moment; when the guests again press this button or open the door when the state canceled.

9, the running state of the air conditioning and room temperature, Menci, window magnetic, safe switch state and real-time transmission of information to the system software.

(five), sleep mode

1, when the guests rest, they can press the "sleep" (or "total control") key, and the system enters the sleep mode.

2, the lighting and broadcasting system are all closed, and automatically enter the "do not disturb" state;

3, air conditioning automatically switches to sleep mode, to maintain a specific temperature and wind speed;

4, in the state of sleep, as long as you press any key, "night light" automatically opens, and awakens the system to return to the normal mode.

(six), the mode of renting out

1, when the guests go out (not to return the house), the system enters the "rented nobody" mode.

2, the air conditioner operates according to the "rent no one" mode (energy saving mode).

3, when the guest returns to the guest room again, the air conditioner will automatically restore the state that the guest previously set, in order to respect the guest's individualized needs.

(seven), the mode of checking out

1, when guests press the "check out" key, the information is sent to the system software, notify the service personnel to check in the room, and the service staff can make advance payment work, so as not to make the guests wait for a long time at the front desk.

2, the guests after check-out, service personnel through a dedicated remote control, according to the actual situation, set the current room status, such as "dirty room", "maintenance" and "real fault" and "real OK", is transmitted to the system software (optional); if the room is "OK" system in unattended mode for rent.

(six), special mode

1, in the process of running the system, will have some special situation, the system will alarm and real-time control, such as: when the room door and no display, long time in the open state, or open the safe detection of non normal state, the system software will alarm reminder service personnel to deal with, ensure guest's personal and property safety;

2, when guests are sick or having special circumstances, they can press the "SOS" emergency call button set up in the guest rooms or bathrooms. The system will send information to the floor communication display and software quickly, so that the service personnel can make emergency handling.

(Dongguan city Hong Bogor Networking Technology Co., Ltd.) http://www.hongmaocn.com/