Touchscreen switch is a new switch device that only needs touch screen on touch switch to realize the connection and disconnection of the control circuit, replacing the key mode of mechanical switch. The installation of a touch screen switch is exactly the same as that of a common mechanical switch. It can be applied to various types of lamps and lanterns with a backlight function.

1, easy installation -- standard 86 wall switch exterior design, no need to connect the zero line, no need to change any accessories to the lamp, it can directly replace the original wall switch.

2. Applicable lamps and lanterns - common lamps such as fluorescent lamp, energy saving lamp, incandescent lamp, lamp, halogen lamp and so on.

3, lightning protection design - with lightning protection function, the performance is safe and reliable.

4, the partition wall remote------ can be separated by the wall for remote remote control (in the room can be remote-controlled living room lamps);

5, do not interfere with each other - the use of digital codec technology, no direction, and the same type of products with the neighbors will not interfere with each other;

6, call from the power off - after the power network blackout calls, switch automatically in the closed state, to avoid waste electricity;

7, two-way control - that is, can be controlled by the wall, and can be controlled by remote control. It can also be controlled by a touch screen wall remote control. It is more convenient to use.

8, centralized remote control - a multi - key remote control can centrally control the whole family's intelligent remote control switch;

9, group control function - can be set on the remote control of any button at the same time control any multi - channel lamps and lanterns at the same time, or at the same time closed;

10, the general open general - the remote control can be free to set the total open or key key, easily press a key to open or turn off all the lamps and lanterns;

11, learning recognition ---- switch can learn to identify any remote controller in our company's products. The switch and remote controller need not be purchased, so users can freely choose and upgrade, add and configure it at will.

12, the unique contact to the code mode, the anti-interference ability is stronger;

13, the wide voltage design 180-250V can work normally.

14, manual part of the traditional mechanical springboard switch control mode, pure silver contact, feel good, long life;

15, no lamps and lanterns, fluorescent lamp and energy saving lamp without compensation capacitance, no flicker phenomenon;

16, ultra low for consumption, standby power consumption: less than 0.011W, calculated according to 1 kwh of electricity =1 formula: annual power consumption (0.011W = 24 * * 365 days), 1 kwh of electricity =0.096 (10 years and less than 1 degrees)