Functional characteristics:
High performance and high speed 32MHz MCU.
The optocoupler isolating the maximum current 100mA of the motion control signal (the output of the signal is: +5V-24V pulse + direction).
Special regular closed positive and negative limit limit, photoelectric isolation signal input port.
Special closed and fast stop passageway.
Support host computer software operation instruction loading, 485 communication, serial communication.
Minimum data unit: 0.001mm.
Fast speed limit speed: 3240mm/min (when the pulse equivalent is 0.001mm).
The maximum speed limit of the machining speed: 3240mm/min (when the pulse equivalent is 0.001mm).
Maximum pulse output frequency: 60KHz (output pulse resolution is less than 1Hz).
The maximum stroke of position control is 174 meters (when the pulse equivalent is 0.001mm).
Control axis number: 1 axis.
The double segment speed regulating multi loop potentiometer can adjust the round and round speed respectively.
Support external adjustable speed potentiometer. (when connected to a potentiometer, the internal potentiometer automatically fails).
The main functions of the system: seven control modes, speed control, position control and acceleration and deceleration control.
2.54 terminal 485 bus extension.
Working voltage: DC12V, control voltage of controller: 24V/1A.
Working current: < 20MA.
Support remote parameter setting, program upgrade and management function.
The temperature of the working environment is -10 C to 45 C, and the humidity is 0% ~ 95%.
Installation method: Standard 35mm guide type installation.
High strength elastic hot Shuo and strong flame-retardant shell.
4 modulus widths (one modulus =18MM).
Appearance size (long * width * high) 90*75*70 (MM).